PTFE Micronized Resin Ptfe Molding Powder
The particle size is 15um-30um,this PTFE micronized powder is molding for film, thin wall, sheet, gasket, club, rob, tube, axletree, seal ring, and loop, filling compound etc.
Description
PTFE Micronized Resin PTFE Molding Powder
PTFE Application:
PTFE DF-16A,this product is suitable for making the film, colour film and as raw material to produce free flow resin.
PTFE DF-162,this product is suitable for diaphragm sheet, bellows and other products with high bending resistance requirements, and has good mechanical and electrical properties, good weld-ability, low metal ion precipitation performance, widely used in semiconductor, 5G and other high-end fields.
PTFE micronized powder is molding for film, thin wall, sheet, gasket, club, rob, tube, axletree, seal ring, and loop, filling compound etc.
PTFE Main Technical Data Sheet:
|
Item |
PTFE DF-16A |
PTFE DF-162 | |
|
Grade A |
Grade A | ||
|
Smoothness & Cleaness |
Clean and white surface |
Clean and white surface | |
|
Tensile Strength, (Mpa)≥ |
30 |
30 | |
|
Elongation, (%)≥ |
300 |
350 | |
|
Bulk Density, (g/L) |
300~450 |
300~500 | |
|
Particle Size (μm) |
15~30 |
20~30 | |
|
Moisture Content, (%)≤ |
0.030 |
0.030 | |
|
Melting Point, (℃) |
372±5 |
372±5 | |
|
Stand Specific Gravity |
2.140~2.170 |
2.130~2.180 | |
|
Electric Strength(KV/MM), ≥ |
80 |
100 | |
| MIT Flexural Life(0.400 sheet,23℃),104 cycle ≥ | / | 600 | |
|
Compression Set (23℃,14MPa, 24h) ,% ≤
|
/ | 6.0 | |
PTFE Packing:
Hot Tags: ptfe micronized resin ptfe molding powder, China ptfe micronized resin ptfe molding powder manufacturers, suppliers, factory
Send Inquiry
You Might Also Like
